EasyManua.ls Logo

Pioneer SP-BS22-LR User Manual

Pioneer SP-BS22-LR
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Speaker System Système d’enceintes Sistema de Bocinas
Operating Guide Guide d’utilisation Guía de Operaciones
SP-FS52, SP-BS22-LR & SP-C22
IMPORTANT NOTICE: The serial number for the equipment is located on the rear of the product.
Please write this serial number on the warranty sheet and keep it in a secure area for future reference.
BEFORE USE
• ThankyouforbuyingthisPioneerproduct.
• Pleasereadthroughthisoperatingguidebeforeusingyour
speaker system to optimize performance. After you have
nishedreadingthisoperatingguide,storeitinasafeplace
for future reference.
• Thenominalimpedanceofthisspeakersystemis6ohms.
Connect the speaker system to a stereo amplifier with a load
impedanceratingrangingfrom4to16ohms(amodelwith
“4-16Ω” displayed on the speaker output terminals).
• Inordertopreventdamagetothespeakersystemresulting
frominputoverload,pleaseobservethefollowingprecautions:
• Donotsupplypowertothespeakersysteminexcessof
themaximumpermissibleinput.
• Whenconnectingordisconnectingcables,besureamplier
power is OFF.
• Donotuseexcessiveampliervolumeifusingagraphic
equalizertoemphasizehighorlowfrequencies.
REMARQUE IMPORTANTE: Le numéro de série pour l’équipement se trouve sur l’arrière du produit. Veuillez écrire le numéro
desériesurlacartedegarantieetleconserverdansunlieusûrpouréventuellementleconsulterplustard.
AVANT TOUTE UTILISATION
• Mercid’avoirachetéceproduitPioneer.
• Veuillezlireleprésentguided’utilisationdanssonintégralité
avant d’utiliser le système d’enceintes pour en optimiser
saperformance.Aprèsavoirnilalecturedeceguide
d’utilisation,conservez-ledansunlieusûrpouréventuellement
le consulter plus tard.
• L’impédancenominaledecesystèmed’enceintesestde6
ohms. Raccordez les enceintes acoustiques à un amplificateur
stéréophonique dont la valeur nominale d’impédance de
chargevade4à16ohms(unmodèlepourlequel«4-16Ω »
estindiquésurlesbornesdesortieauxhaut-parleurs).
• Pouréviterd’endommagerlesenceintesacoustiquesparune
surchargeàl’entrée,observezlesprécautionssuivantes:
• Nefournissezpasauxenceintesacoustiquesunepuis-
sanceélectriquedépassantl’entréemaximaleautorisée.
• Lorsdelaconnexionoudeladéconnexiondescâbles,
veillez à mettre l’amplificateur hors tension.
• N’utilisezpasdevolumed’amplicateurexcessiflorsde
l’utilisationd’unégaliseurgraphiquepouraccentuerles
hautes ou basses fréquences.
AVISO IMPORTANTE: El número de serie del equipo está ubicado en la parte posterior del producto. Por favor anote el
númerodeserieenlahojadegarantíayguárdeloenunlugarseguroparausarlocomofuturareferencia.
ANTES DE USARLO
• GraciasporcompraresteproductoPioneer.
• Porfavorleaestaguíadeoperacionesantesdeusarsusistema
debocinas,andeoptimizarelfuncionamiento.Unavez
quehayaterminadodeleerestaguíadeoperaciones,
guárdelaenunlugarseguroparausarlacomoreferencia
en el futuro.
• Laimpedancianominaldeestesistemadebocinases6ohmios.
Conecte el sistema de bocinas a un amplificador estéreo con
unaimpedanciadecargade4a16ohmios(unmodeloque
indique“4-16Ω” en los terminales de salida a bocinas).
• Paraevitardañarelsistemadebocinasporunasobrecarga
alaentrada,tomelassiguientesprecauciones:
• Nosuministremáspotenciadeentradaalsistemadebocinas
quelamáximapermitida.
• Cuandoconecteodesconectecables,veriquequelacorriente
alamplicadorestéAPAGADA.
• Nouseunvolumenexcesivodelamplicadorsiusaun
ecualizadorgrácoparaenfatizarlasaltasobajasfrecuencias.
SP-C22
SP-BS21
(180.68 mm x 320 mm)
SP-FS52SP-BS22-LR

Other manuals for Pioneer SP-BS22-LR

Question and Answer IconNeed help?

Do you have a question about the Pioneer SP-BS22-LR and is the answer not in the manual?

Pioneer SP-BS22-LR Specifications

Power IconPower
maximum input power80 W
power handling80 Watt
Sound IconSound
frequency range55 Hz-20 kHz
sensitivity85 dB
cross-over frequency3 kHz
Components IconComponents
woofer size4”
tweeter size1”
nominal impedance6 Ohms
Weight and Dimensions IconWeight and Dimensions
weight9 lbs 2 oz
dimensions7-1/8” x 12-9/16” x 8-7/16”

Summary

Before Use and Safety Precautions

Essential Precautions for Preventing Damage

Observe precautions to prevent speaker system damage from input overload, excessive power, or improper amplifier volume settings.

Connecting Your Speaker System

Correct Speaker Wiring and Polarity

Ensure correct polarity when connecting speaker cables to achieve optimal sound quality and prevent damage.

Installing and Removing the Grill

Instructions on how to safely remove and reattach the speaker grill for cleaning or access.

Installing the Base for SP-FS52 Speakers

Guidance on attaching the included base to the SP-FS52 floorstanding speakers using screws.

Securing the SP-FS52 Floorstanding Speakers

Steps and crucial safety warnings for securing the SP-FS52 speakers to prevent tipping and injury.

Speaker Placement and Tuning

Using Feet with the SP-C22 Center Speaker

Instructions for positioning the SP-C22 center speaker using its included feet for optimal listening angles.

Placement for Front and Surround Speakers (SP-FS52/SP-BS22-LR)

Guidance on positioning front and surround speakers for best results, including distance and angling.

Placement and Setup for SP-C22 Center Speaker

Recommendations for placing the center speaker relative to the TV and receiver settings for optimal dialogue clarity.

Installation, Maintenance, and Specifications

General Installation Precautions

Important safety warnings regarding placement near heat sources, high places, and potential damage from improper installation.

Cabinet Maintenance Guidelines

Instructions on how to clean and maintain the speaker cabinets using appropriate cloths and mild cleansers.

Technical Specifications

Detailed specifications for SP-BS22-LR, SP-C22, and SP-FS52 models including impedance, power, and dimensions.

Warranty Information and Service

Limited Warranty Terms and Coverage

Details on the limited warranty, what it covers, exclusions, and conditions for validity.

Warranty Validity and Exclusions

Information on warranty validity by country of purchase and specific exclusions like misuse or unauthorized modifications.

How to Obtain Service

Instructions on how to contact Pioneer for service and the required documentation for warranty claims.

Dispute Resolution Process

Procedures for resolving disputes with Pioneer under the warranty, including contact information.

Hearing Safety Guidelines

Establishing a Safe Listening Level

Advice on setting the volume control at a low setting and slowly increasing it to a comfortable, distortion-free level.

Guidelines for Safe Listening

Recommendations to avoid dangerously high volumes and to use caution in hazardous situations.

Related product manuals