Need help?Do you have a question about the Piper Pawnee C and is the answer not in the manual?
Details of the aircraft's engine and associated components.
Key performance metrics including speed, climb rate, and range.
Information on gross weight, empty weight, useful load, and hopper load.
Specifications for fuel capacity, oil capacity, and fuel grade requirements.
Physical measurements of the aircraft, including wingspan and length.
Details on tire pressure, tire size, and landing gear components.
Description of the engine models, horsepower, and propeller types used.
Construction details of the aircraft's main body and wing structures.
Information on the aircraft's landing gear system and shock absorbers.
Design and construction of the tail surfaces (fin, rudder, stabilizers, elevator).
Details on flight and engine control mechanisms and their operation.
Overview of the fuel tank, lines, strainer, and shut-off valve.
Components of the electrical system, including battery, alternator, and wiring.
Description of the aircraft's exterior paint and fabric finish.
Details on instruments, seat adjustment, and safety harnesses.
Procedures and checks to be performed before flight.
Steps for pre-operation checks, including controls and parking brake.
Procedures for starting the engine, both cold and warm.
Steps for warming up the engine and performing ground checks.
Guidance on take-off procedures, climb attitudes, and level flight.
Information on stall characteristics and speeds for the aircraft.
Procedures for conducting approach and landing operations.
Pilot's responsibility for maintaining aircraft weight and balance.
Recommended fuel grades and octane ratings for each model.
Specifications for oil capacity, change intervals, and recommended grades.
Procedures for checking and maintaining the aircraft battery.
Recommended procedures for cleaning Plexiglas surfaces.
Instructions for checking and servicing the fire suppression system.
Procedures for brake fluid service and tire maintenance.
Guidance on inspecting, cleaning, and replacing the air filter.
Procedures for servicing landing gear shock struts and tires.
Detailed checks for engine, fuel, cockpit, landing gear, fuselage, wings, and empennage systems.
Procedures for leveling the aircraft and checking rigging adjustments.
Location and importance of the aircraft's serial number plate.
To Next Page
General