To Next PageTo Next Page
Need help?Do you have a question about the Pipishell PIMFK1 and is the answer not in the manual?
General| Mount Type | Full Motion |
|---|---|
| Material | Steel |
| Tilt Range | +5°/-15° |
| Maximum TV Size | 70 inches |
| Weight Capacity | 88 lbs |
| Extension Range | 19.5 inches |
Important safety warnings regarding installation and potential risks of improper assembly or use.
Lists all tools required for installation that are not provided in the package.
Details all the components and hardware included with the TV wall mount.
Measure TV mounting hole distance to check compatibility with VESA standards.
Guide to selecting the proper screw length for TV mounting by checking thread depth.
Instructions for attaching the TV bracket arms to a flat screen television.
Instructions for attaching the TV bracket arms to a curved television.
Steps for mounting the wall plate securely to wood studs using lag bolts.
Steps for mounting the wall plate using anchors for concrete or brick walls.
The process of lifting the TV and hooking it onto the wall plate brackets.
Engaging the locking mechanism to ensure the TV is securely attached to the mount.
Fine-tuning the TV's horizontal level within +/- 3 degrees.
Adjusting the TV's tilt angle from +5 degrees to -12 degrees.
