75
SINUS motorglider
www.pipistrel.si
REV. 0
Handling and maintenance
Poor braking action
In case you notice poor braking action even when hydraulic brake levers are depressed fully, it is not
necessary the air bubbles in the hydraulic lining, which is causing the problem.
The main wheel’s main axis’ nut (especially after a wheel and/or axis replacementnut) may be tight-
ened incorrectly so that the brake shims do not make contact with the brake plate. Please consult
the manufacturer or authorised service personnel for further information.
Schematic of wheel and wheel brakes
Schematic of hydraulic brakes’ lining
To Next Page
Loading...
Need help?
General
