Pisector GSM-01 User Manual

Wireless GSM Alarm System
(GSM-01)
User Manual
Profile
For a better understanding of this product, please read this
user manual thoroughly before using it.

Pisector GSM-01 Specifications

General

Brand	Pisector
Model	GSM-01
Category	Security System
Language	English

Summary

Features

Key Features Overview

Comprehensive list of system capabilities including GSM bands, zone support, remote control, SMS control, voice alerts, and appliance control.

Installation Guide

Host Setup and Connections

Steps for inserting the SIM card, connecting the antenna, and powering up the main alarm unit.

Setting Alarm Numbers and SMS

Saving Alarm Phone Numbers

Instructions for programming up to five alarm phone numbers into the system via SMS commands.

Configuring SMS Alert Content

Details on default SMS messages for triggered zones and how to customize them.

Testing the Host Alarm

Alarm Testing Procedures

Steps to test the alarm system functionality, including arming status and sensor triggers.

Controlling the Host Unit

SMS Host Control Commands

List of SMS commands to control various functions of the alarm system remotely.

Call Host Control Commands

Instructions for controlling the alarm system by calling the host unit and entering commands.

Command Reference Table

SMS and Phone Command List

Comprehensive table detailing commands for arming, disarming, siren control, listen-in, and relay functions.

Remote Controllers

Out Arm Operation

How to activate the 'Out Arm' mode using the remote, and its effect on detectors.

Home Arm Operation

Instructions for using the 'Home Arm' mode, specifying which detectors remain active.

Adding and Managing Detectors

Adding Detectors for All Zones

Adding Detectors for Inner Defense Zone

Deleting Detectors

Frequently Asked Questions (FAQ)

Troubleshooting: Cannot Alarm by Phone