III. Set alarm phone numbers
You can send message to the unit to set 5 alarm phone numbers and 7
alarm SMS.
The command format: password #operation code # content #
1. Save the alarm phone numbers.
123456#5X# alarm phone numbers #. (X = 1 to 5)
Save 5 group alarm phone numbers into the base.
For example: 123456#51# 13905950001#
Save the 1st alarm phone number 13905950001 into the base.
2. There are 7 default SMS contents in the base, but you can change it.
When the wireless detector in zone 01 to 05 is triggered, the default
SMS content will be: Wireless Activated (X); X can be 01 to 05.
For example:
if detector in zone 01 is triggered the SMS will be:
Wireless Activated (01)
When the wireless detector in zone 06 to 16 is triggered, the default
SMS content will be:
Wireless Activated (X); （X=06-16）
When the wire detector is triggered, the SMS message will be: Wire
Activated (X);（X=1-3）, for port 1 to 3 alarm
To Next Page
Loading...
