PistenBully 600 - Fueling the Heating System

Passenger cab.en
Operation Checks Use Safety Technical data Overview
14/20
Use
Heating, passenger cab
The heating for the passenger cab is enabled from the
driver's seat. Only when this has been done can the
heating in the passenger cab be switched on.
Switching on the passenger cab heating
Filling the fuel tank for the passenger cab
heating
WARNING!
Do not allow fuels to splash onto the skin
(wear protective gloves, change clothes if
fuel spills onto them). Do not inhale fuel
vapours or ingest fuels (danger of
poisoning).
WARNING!
Danger of explosion due to the formation
of gas in the fuel tank!
No open flames while filling the tan
k.
Enabling the passenger cab heating
Bottom switch pressed
Passenger cab heating is enabled
Indicator lamp lights up
The heating in the passenger cab can be switched
on.
Press switch 1 to ON.
Indicator lamp lights up
Set the heating temperature via
dial 2.
Set the fan speed via the 4-stage
switch 3
i
3
1
2
Diesel filler neck 4
Diesel fuel EN 590, but sulphur con-
tent <10 ppm or RME biodiesel DIN
V 51606
4
USE