Pitco SSPG14 - User Manual

28 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

Installation & Operation Manual

L20-331, rev.02 (08/11)

IMPORTANT FOR FUTURE REFERENCE

Please complete this information and retain this manual

for the life of the equipment:

Model #: ___________________________

Serial #: ___________________________

Date Purchased: ____________________

ENGLISH

SSPG14: Floor Model Gas Pasta Cooker

SSRS14: Floor Model Rinse Station

D

E

I

F

I

T

R

E

C

D

E

S

I

G

N

C IRE T IF E D

Table of Contents

Questions and Answers

T
Tasha ScottJul 26, 2025
Why Pitco Pasta Maker controller does not activate?
- K
  kyleconwayJul 26, 2025
  If the Pitco Pasta Maker's controller isn't activating, several factors could be at play. First, ensure the appliance is receiving power by checking the power cord and the building's main power supply. A tripped circuit breaker could also be the culprit; try resetting it. Verify that the I/O button is pressed to the 'On' position, and that the controller itself is turned on. Finally, make sure the power cord is securely connected.
H
Harold DunnAug 3, 2025
What to do if Pitco Pasta Maker controller displays heating but water won't heat?
- B
  Brian WilsonAug 3, 2025
  If your Pitco Pasta Maker's controller indicates it's heating, but the water remains cold, it's possible that the high-temperature limit(s) have been tripped. In this case, allow the appliance to cool down completely, and then reset the high-temperature limit(s).
E
Emily GreenAug 10, 2025
What to do if water temperature is low in Pitco Pasta Maker?
- P
  Patricia DuncanAug 10, 2025
  If the water temperature in your Pitco Pasta Maker is too low, allow the appliance to heat up. If the issue persists, turn off the appliance, let it cool completely, then refill it with water before turning it back on.
A
Amanda FieldsAug 17, 2025
What to do if drain valve is open while Pitco Pasta Maker controller is on?
- J
  Jesse PowellAug 17, 2025
  If the drain valve is open while the controller of your Pitco Pasta Maker is on, turn off the appliance. Then, close the drain valve before turning the appliance back on.

Summary

Installation

Checking Your New Appliance

Inspect appliance for damage, verify parts received, and locate model/serial numbers.

Installation Clearances

Details required clearances for combustible/non-combustible installations and aisle space.

Leg;Caster Installation and Leveling

Procedure for attaching legs/casters and leveling the appliance for stability and ventilation.

Plumbing Connections

Instructions for water supply and drainage connections, including water quality checks.

Gas Connection

Guidance on gas supply line sizing, connection types, and leak testing for safe operation.

Electrical Connections

Power requirements for NA/Intl. installations and electrical safety precautions.

Ventilation and Fire Safety Systems

Importance of ventilation for safety, emissions, and operation; code compliance.

Initial Adjustments

Covers filling the appliance, lighting instructions, pilot flame, and main burner adjustments.

Initial Cleaning

Procedure for cleaning the appliance to remove protective oil before first use.

Operation

Operational Features

Overview of key components and their functions, illustrated with a diagram.

Filling the Appliance

Instructions for filling the cook tank and rinse tank with water to correct levels.

Appliance Start Up

Steps to start the appliance: filling, lighting, and mode selection.

Cooking

General guidance on cooking, adding water, and using different operational modes.

Appliance Shutdown

Procedures for placing the appliance in standby or complete shutdown modes.

Preventative Maintenance

Daily Preventative Maintenance

Daily checks and cleaning tasks to ensure safety and peak performance.

Monthly Preventative Maintenance

Monthly maintenance tasks, including de-liming the tank.

Annual;Periodic Preventative Maintenance and Inspection

Annual inspection by technician: probes, controller, electrical components.

Gas Combustion System

Annual inspection of gas leaks, burners, pilot, pressure, and ignition system.

Ventilation Hood

Inspection of ventilation hood operation for appliance safety and proper functioning.

Troubleshooting

Power Failure

Procedure to follow after power restoration, including waiting time and restart.

High Temperature Limit Switch

How to reset the high temperature limit switch if it trips due to overheating.

Drain Valve Interlock

Procedure to resume operation after the drain valve interlock is tripped.

Troubleshooting Chart

A table listing common problems, probable causes, and corrective actions.

Controller Warning Displays

Explains controller warning messages and their corresponding actions.

Pitco SSPG14 Specifications

General

Brand	Pitco
Model	SSPG14
Category	Pasta Maker
Language	English

Related product manuals

Preview: Pitco SSRS14