Cleaning, maintenance and service
The Pitley heater has been designed so that the robust chassis does
not require any maintenance. Switch off and unplug the heater
Only clean it when it is cool. When cleaning, use a microfibre cloth
and avoid using aggressive cleaning agents, scouring sponges or
stiff brushes. Do not use any flammable cleaning agents. Once you
have cleaned the heater, allow it to dry before switching it on again.
Maintenance
In general, the heater does not require any maintenance. As the
heater has been sealed as per IP65, it must not be opened by
unauthorised persons. If there seems to be a problem, contact your
If you notice any damage or a fault with your heater, it must be
checked and repaired by a specialist. This may be a qualified
electrician or your dealer. Damage or defects arising from
unauthorised repairs, as well as modifications to the heater, misuse,
negligence, and improper or inadequate maintenance will be voided
warranty. Dealers and the manufacturer shall not be liable for misuse
or improper handling.
To Next Page
Loading...