Page 4 For technical questions, please call 1-888-866-5797. Item 70622
Operating Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
WARNING! TO PREVENT SERIOUS
INJURY: Do not overinflate objects! Check
pressure continually while inflating.
1. Put vehicle in park and set Emergency Brake. Turn
vehicle key to “accessory” or to the “On” position.
2. Place the Portable Inflator outside of the vehicle.
WARNING! TO PREVENT SERIOUS INJURY: Due
to the risk of carbon monoxide poisoning, do not
run the vehicle’s engine within an enclosed area.
NOTICE: Do not allow the Portable Inflator to
continuously run for more than 10 minutes at
a time. After 10 minutes, allow it to cool for 25
minutes, then resume inflation. Failure to do so
may cause the unit to overheat and burn out.
3. Select desired accessory for object to be filled.
• The Air Outlet has a universal tire adapter, so
no adapter is needed to fill a standard tire.
• To fill a standard athletic ball, thread
on the Needle (10) accessory.
• When using the unit as an air blower,
thread on the Nozzle (11) accessory.
Note: If the tire is completely deflated, the
tire seal may be broken. Use jack to lift the
vehicle slightly before inflating the tire.
4. Be sure the valve stem is clean and free
of dirt before connecting valve connector.
Screw valve connector to the valve
stem of the object to be inflated.
5. Plug the Cigarette Lighter Adaptor into
the vehicle’s cigarette lighter socket.
6. Turn on the Portable Inflator by
pressing the ON/OFF button.
CAUTION! Inflator head gets hot during
operation. Allow head to cool before handling.
7. Continue inflating until the recommended
pressure is reached.
Note: To properly read the air pressure in
tire, the inflator must be turned off.
Note: Do not overinflate tires. Refer to owners manual
or on drivers-side door jam for correct tire pressure.
8. When finished, turn off the Portable Inflator
by pressing the ON/OFF button.
9. Disconnect from socket in the vehicle.
10. Remove air outlet hose from item being inflated.
11. Allow the inflator to cool, then wipe
external surfaces with a clean cloth.
12. Store the Accessories, Hose, and Cord/
Cigarette Plug in the recessed holder.
13. Store in a clean, dry, safe location
out of the reach of children.
To Next Page
Loading...
