PIVOTPOWER®GENIUS|USERMANUAL|V-O2 | PAGE 4
IMPORTANTSAFETY
INSTRUCTIONS/WARNINGS
CAUTION
To reduce the risk of electric shock, do not
remove cover (or back). No user-serviceable
parts inside. Refer servicing to qualified
service personnel.
WARNING
To reduce the risk of fire or electric shock,
do not expose this appliance to rain or moisture.
WARNING
Timer could turn-on unexpectedly without the
user being present. To Reduce the Hazardous
Condition – unplug the appliance that is plugged
into the receptacle(s) controlled by the timer
before servicing.
CAUTION
This unit must be connected to an outlet with
a protective grounded connection.
CAUTION
To completely disconnect this product from
power, disconnect the plug from the wall outlet.
The plug is used to completely disconnect the
power supply to the unit and must be within easy
access to the user.
CAUTION
To reduce the risk of electric shock, do not
perform any servicing other than that contained
in the operating instructions unless you are
qualified to do so.
CAUTION
Wink devices connect by receiving flashing
light patterns that come from your phone’s
screen. Please note that a very small percentage
of individuals may experience epileptic seizures
when exposed to such light patterns or flashing
lights. If you have an epileptic condition,
consult your physician prior to using this app
to connect a device.
IMPORTANTSAFETYINSTRUCTIONS
1 Read Instructions—All safety and operating
instructions should be read before operating
the device.
2 Heed Warnings—All warnings on the device and
in the operating instructions should be adhered to.
3 Follow Instructions—All operating and safety
instructions should be followed.
4 Water & Moisture—The device should never be
used in, on or near water for risk of electric shock.
5 Ventilation—The device should always be located
in such a way that it maintains proper ventilation.
6 Heat—Never locate the device near heat sources
such as radiators, floor registers, stoves or other
heat-generating devices.
7 Grounding—DESIGNEDFORINDOORUSEONLY!
The device should ONLY beconnected to a
grounded outlet. DONOT connect product to an
ungrounded outlet.
8 CAUTION: Risk of Electric Shock. Do not plug
into other Relocatable Power Taps.
9 Power Cord Protection—Power cables should
be routed so they are not likely to be stepped
on or crushed by items placed on them or against
them. Special attention should be paid to areas
where the plug enters a socket and where the
cord exits the device.
10 Cleaning—Clean product with a damp so cloth.
DONOT submerge Pivot Power Genius in water.
*Always unplug device from power before cleaning
11 Periods Of Non-Use—Make sure to unplug Pivot
Power Genius when it is not expected to be used
for several months.
12 Dangerous Entry—Care should be taken that no
foreign objects or liquids fall or are spilled on or
inside the device.
13 Damage Requiring Service—The device should
be serviced by licensed technicians when:
• The internal electronic components
have been damaged.
• Objects have fallen or liquid spilled inside
of the device.
• The device has been exposed to moisture.
• The device does not appear to be operating
properly or exhibits a marked change in
performance.
• The device has been dropped or becomes
damaged.
14 Service—The device should always be serviced
by licensed technicians. Only replacement parts
specified by the manufacturer should be used.
The use of unauthorized substitutions may result
in fire, shock, or other hazards.
15 When servicing: Unplug any appliance that is
plugged into the power strip before servicing.
16 Caution–Do not install this device if there is
not at least meters ( feet) or more of wire
between the electrical outlet and the electrical
service panel.
17 Pivot Power Genius features an internal
protection that will disconnect the surge protective
component but will maintain power to the load –
now unprotected. If this situation is undesirable
for the application, follow the manufacturer’s
instructions for replacing this device.
To Next Page
Loading...