pivotcycles.com info@pivotcycles.com 1.877.857.4868
4
VAULT ISO FLEX INSTALLATION
10.) There is an opening in the Rubber Cap to
access the Seat Post Clamp screw. Torque the
Seat Post Clamp Screw to 5Nm.
8.) Apply some grease to the seat tube and
insert the seat post into the frame.
9.) Slide the Seat Post Clamp Rubber Cap down
over the Seat Post Clamp.
11.) Confirm saddle height and position mea-
surements.
7.) Slide the Seat Post Clamp Rubber Cap onto
the seatpost if it was removed.
12.) Installation is complete.
5 Nm
To Previous Page
Loading...
