What to do if Pivot SHUTTLE LT Bicycle battery is overheating?
- Kkristin53Jul 29, 2025
If the battery operation temperature is higher than normal on your Pivot Bicycle, leave the battery in a cool place until its temperature sufficiently decreases.
What to do if Pivot SHUTTLE LT Bicycle battery is overheating?
If the battery operation temperature is higher than normal on your Pivot Bicycle, leave the battery in a cool place until its temperature sufficiently decreases.
What to do if unexpected power disconnection was detected on Pivot SHUTTLE LT?
If the power on your Pivot Bicycle turns off unexpectedly, first inspect the power cord for any signs of damage. Then, try turning the power off and back on.
How to cool down Pivot Bicycle drive unit?
If the drive unit temperature of your Pivot Bicycle is higher than normal, stop using the assist function until the drive unit cools down.
What to do if Pivot SHUTTLE LT Bicycle turns off due to current leakage?
If the power was turned off on your Pivot Bicycle due to detected current leakage, remove components from the drive unit and turn it back on to identify the faulty component.
How to initialize torque sensor on Pivot Bicycle?
If the torque sensor on your Pivot Bicycle was not initialized properly, turn the power off and then back on again.
Covers suspension/tire setup, saddle adjustment, battery charging, and system power on/off.
Explains assist switch functions, cycle computer operation, and screen display elements for system interaction.
Guides on setting sag, compression, and rebound for Fox Float X and Fox 38 forks based on rider weight.
Advice on recommended tire pressure for optimal riding performance, traction, and pinch flat prevention.
Covers on-bike, off-bike charging, USB-C port usage, and charger LED indicators for battery status.
Step-by-step guide for safely removing and installing the e-bike battery from the frame.
Instructions for connecting to and using the Shimano E-Tube Project app for bike customization and firmware updates.
Overview of app menus for customizing assist profiles, updating firmware, and system maintenance.
Explains common warning codes and error messages displayed on the cycle computer and their remedies.
Visual schematics identifying Shimano STEPS components and their part names on the bike frame.
Detailed diagrams and tables of small parts, hardware, and torque specifications for assembly.
Diagrams illustrating internal cable routing for maintenance and handlebar switch connections.
Important safety precautions, intended use, and liability information for operating the bicycle.
Comprehensive safety instructions for handling, charging, storing, and disposing of the e-bike battery.
| Wheel Size | 29" |
|---|---|
| Drivetrain | Shimano XT |
| Brakes | Shimano XT 4-Piston |
| Tires | 29" |
| Stem | Pivot Precision Alloy, 50mm |