Pivot SHUTTLE LT - Table of Contents

TABLE OF CONTENTS PAGE
1. Quick Start Guide
1
- Suspension/Tire Set-up 1
- Adjusting Saddle Height 1
- Charging the Battery 1
- Powering the System ON and OFF 1
- Assist Switch and Shifter Function 2
- Operating the Cycle Computer 2
- Screen Display 2
2. Bike Set-up
3
- Setting Proper Sag 3
- Setting Compression Damping on the Fox Float X 3
- Setting Open Mode Adjust on the Fox Float X 3
- Setting Rebound Damping on the Fox Float X 4
- Setting Air Pressure on the Fox 38 Forks 4
- Setting Compression Damping on the Fox 38 Forks 5
- Setting Rebound Damping on the Fox 38 Forks 5
- Recommended Tire Pressure 5
3. Charging
6
- Charging the Battery 6
- Charger LED Lamp 6
- USB-C Charging on the Shuttle LT 6
- Battery Removal and Installation 7
4. Shimano STEPS System
8
- Connecting to E-Tube Project App 8
- Main Menu for E-Tube Project 8
- Customize Menu in E-Tube Project 8
- Assist Profiles in E-Tube Project 9
- Update Firmware Menu in E-Tube Project 9
- Maintenance Menu in E-Tube Project 9
5. Troubleshooting
10
- Cycle Computer Warning Codes 10
- Cycle Computer Error Codes 11
6. Schematics
12
- Shimano STEPS Schematic 12
- Small Parts Schematic 13
- Small Parts Table 14
- Wiring Diagrams 15
7. Additional Information
16
- Shimano STEPS System 16
- Pivot Shuttle LT 16
- Bicycle Safety 16
- Battery Safety 16
- Sources 18