Need help?Do you have a question about the Pix-link LV-WR07 and is the answer not in the manual?
General| Frequency Band | 2.4GHz |
|---|---|
| Maximum Wireless Speed | 300Mbps |
| Interface | Web-based management |
| Power Supply | DC 5V/1A |
| Standards and Protocols | IEEE 802.11n |
| Security | 64/128bit WEP; WPA/WPA2 |
| Antenna | 2 x 5dBi External Antennas |
| Button | Reset |
| LED Indicator | Power, LAN, WAN |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -40°C to 70°C |
| Wireless Standard | IEEE 802.11b/g/n |
Describes the Wireless-N Router as a combined wired and wireless network device for small business and home office use.
Lists key features of the Wireless-N Router, including Wi-Fi standards, ports, security, and management.
Details the items included in the router's package, such as the router, guide, adapter, and cable.
Describes the LEDs on the front panel of the router, including their names, status, and indications.
Details the ports and buttons on the rear panel of the router, including Power, WAN, LAN, Reset, and WPS.
Lists the necessary prerequisites for connecting the router, including internet service and computer requirements.
Specifies ideal conditions for router installation, such as ventilation, temperature, and humidity.
Provides step-by-step instructions for physically connecting the router to the modem and power.
Explains how to establish a connection between a computer and the router, either via Ethernet cable or wirelessly.
Covers the default IP address, subnet mask, and methods for configuring IP settings on a PC.
Guides users through the web-based utility for quick router configuration, including accessing the utility and logging in.
Describes how to configure WAN settings through the 'Advance' menu, including selecting the WAN mode.
Details how to configure basic wireless settings like SSID, broadcast, security, channel, band, and bandwidth.
Provides instructions on how to update the router's firmware using the web-based utility.
Explains how to restore the router's configuration to factory default settings.
Details how to back up the current router configuration and restore it from a backup file.
Instructions on how to reboot the router through the system menu.
Steps to install or check the TCP/IP component on a Windows PC for network configuration.
How to configure TCP/IP settings to automatically obtain an IP address and DNS server.
How to manually configure TCP/IP settings, including IP address, subnet mask, gateway, and DNS servers.
To Next Page
