4. Wi-Fi and Internet Setup
4.1 Connect the device to a Wi-Fi wireless network
Each unit has a dedicated email address, which makes it possible for the device to receive
pictures directly from the Internet. To receive pictures, the device must be connected to
the Internet through a Wi-Fi gateway.
Here is how to connect your photo frame to a local Wi-Fi network:
1. Access the Main Menu (If you are playing a slideshow, press slowly the button Menu
2 times to come back to the Main Menu)
2. Scroll to CHANGE SETTINGS and press " " to enter it
3. Scroll to Wi-Fi and press " ". The device will automatically start a scanning
process to discover available wireless networks.
4. Using the UP and DOWN keys navigate the interface to select the Wi-Fi network
you want to connect to.
5. Press the button to connect to the selected network.
If the network has its security enabled, the device will automatically pop up a window
where you can enter the security key. All other parameters are AUTOMATICALLY
configured by your Pix-Star.
After you enter the security key in the interface using the virtual keyboard, press
CONFIRM then press JOIN, it will start the Wi-Fi connection process.
Note 1: A DHCP server must be running on your network in order to automatically assign
an IP address to your device. Most personal Wi-Fi networks run a DHCP server.
Note 2: Connection to Public Hotspots or to a network that requires an authentication
with user name and password through a web page (HTML) are NOT supported by this
product (there is no browser in the device). If you use a router with a “guest” access that
uses this web page authentication mode please connect to the “main” access instead.
To Next Page
Loading...