2）
3）
Transmitter:
Transmitter is under the standby
mode when install battery.
To turn on the power, press Power
Switch/Setting Button for 2 seconds.
Function Light Indicator turns on and
showing the existing group. Function
Light Indicator turns off after 4
seconds, transmitter enters into
standby mode.
Under the standby mode, press
Power Switch/Setting Button for 2
seconds. After red light blinks for several times, the
transmitter turns off.
Power Switch:
1）
Receiver:
4）
Pawn RX is using 2-steps
power switch; switch to OFF to
turn off and switch to ON to
turn on.
Please turn off the transmitter when not in use.
To Next Page
Loading...
