To Next PageTo Next Page
Need help?Do you have a question about the PixiePro PX2-NRC-1142 and is the answer not in the manual?
Explains the purpose and primary functions of the Networked Room Controller (NRC).
Details how the NRC interacts with audiovisual components via web interface or modular panels.
Provides a chapter-by-chapter guide to understanding the manual's content and structure.
Illustrates the NRC as a stand-alone control device for a projector using RS-232 and IR.
Shows the NRC with a Modular Panel controlling a projector, screen, and lift via relays.
Details a system with NRC, Modular Panel, Control Pucks for DVD/VCR and amplifier, and security loop integration.
Guides users on initial setup for NRC configuration without network connectivity.
Outlines the ten essential steps required to establish network connectivity for the NRC.
Guides the user through selecting a room name and choosing a configuration method for the NRC.
Details how to select the appropriate display driver and configure related options for the connected device.
Explains how to add and configure connected SP Bus devices like Modular Panels and Control Pucks.
Guides the assembly of the virtual control panel and its cosmetic settings for user interface.
Maps input selection commands from drivers to specific input selection buttons on the control panel.
Details how to fine-tune commands for buttons and events, including action lists and round robin functions.
Explains how to access and assign secondary functions to buttons that are not visible to casual users.
Guides users on configuring attached devices, including creating new RS-232 and IR drivers.
Details advanced switching configurations, including multiple device modes and input selection options.
Covers advanced settings for the PixiePro assembly, including multiple-device mode and custom TCM commands.
Explains advanced customization features like round robin lists, macros, and event chaining for complex control sequences.
Discusses triggering actions via system events, including Aux Audio and custom event lists.
Explains the requirement for an SNTP server for scheduling and other network-dependent NRC features.
Details the need for an SMTP server for the NRC to send email notifications and alerts.
Guides on setting up scheduled events, linking them to event lists and defining active periods.
Explains the role of a syslog server for logging system messages and errors from the NRC.
Covers securing web access by changing the Admin password and managing user accounts.
Details how to set up a keycode for panel access to prevent unauthorized system activation.
Explains how to power the NRC and other SP Bus devices using the included power supply.
Provides instructions and adapter details for connecting the NRC to display devices via RS-232 and IR.
Describes the function and limitations of the NRC's integrated low-voltage relays for controlling screens and lifts.
Details how to connect SP Bus devices like Pucks and Modular Panels to the NRC using CAT5 cable.
Addresses issues where the NRC configuration page fails to load in the browser.
Troubleshoots problems with saving or uploading NRC configuration changes.
Helps resolve issues where SP Bus devices do not appear as connected in the configuration.
Provides solutions for when the NRC's power off button is not functioning correctly.
Guides on how to resolve issues where display drivers are not listed or available.
General| Brand | PixiePro |
|---|---|
| Model | PX2-NRC-1142 |
| Category | Controller |
| Language | English |
