1) Turn on the camera by pressing 1x on the «on/off» (blue led)
2) Press 1x the «mode» button to activate the 1080P video recording mode. (blue/red
led)
3) To activate motion detection, press and hold the «mode» button on the mini-camera
for about 3 seconds. (Red led flashes and both led’s go off)
4) Stop this function by pressing the «on/off» button once.
As soon as motion is detected within 5 meters the video recording will start automatically.
The red and blue led’s will blink shortly and the cam will record for 1 to 5 minutes after
which it will go back into (detection) standby. (led’s are off)
Video recording is automatically saved every 5 minutes.
1) Turn on the camera by pressing the «on/off» button once.
2) Press 2x the «mode» button and the led changes from blue to red.
3) Press the «on/off» button once to take a picture.
To Next Page
Loading...