PiXXO mini camera - Page 23

23
Set date and time
720P Motion Detection with Night Vision (infrared IR)
1) Press the «on/off» button once to turn the cam on (standby = blue led).
2) Press the «on/off» button again for approx. 3 seconds - red led flashes twice and the
blue led turns on. You are now in night vision mode.
3) Press and hold the «mode» button and release it when the red led starts blinking. The
red led will blink 5 times and both led's will go off during recording.
4) Press the «on/off» button once to stop this function and recording.
1080P Motion Detection with Night Vision (infrared IR)
1) Press the «on/off» button once to turn the cam on (standby = blue led).
2) Press the «on/off» button again for approx. 3 seconds - red led flashes twice and the
blue led turns on. You are now in night vision mode.
3) Press 1x the «mode» button to activate the 1080P mode.
4) Press and hold the «mode» button and release when the red led starts blinking.
The red led will flash 5x and both led's will turn off during recording.
5) Press 1x the «on/off» button to stop this function and recording.