20
PizzaMaster®
1. Turn off the water supply and
disconnect the hose from the
oven.
3. Take out the filter and clean it
4. From the Water Block, take out
the filter and clean it
*Repeat the ”Installation steps”
before using the Steam System
1. RESET WATER BLOCK:
If a failure occurs causing a conti-
nuous water leak, the Water Block
will shut off.
Using a pipe wrench, remove the
Water Block Safety valve
2. Press the red plunger to reset
the Water Block
*Repeat the ”Installation steps”
before using the Steam System
2. Open the filter on the back flow
valve
Cleaning
Maintenance
Steam System Cleaning and Maintanence
Maintenance and Preventative Maintenance
To Next Page
Loading...
