PizzaMaster PM 722 - Oven Installation Procedures; Assembly: Ovens with Legs

5
PizzaMaster®
Positioning the oven
Positioning the oven
When positioning your oven, it is important to consider
the following points:
• Theovenisnormallyinstalledonthelegssupplied
with it. Remember to fit the legs with the lockable
wheels at the front of the oven. It is also important for
the floor to be flat, so that the oven is both horizontal
and stable.
• Forventilationoftheoven
DO NOT install closer than 2” (50mm) from all sides .
• Ifpossible,positiontheovensothatitsright-hand
side can be accessed easily in order to remove the
right-hand panel. This gives easy access to the back
of the control panel and facilitates servicing of the
oven.
• Theovencanalsobeinstalledwithoutitslegs.Inthis
case, however, it is important to position the oven so
that the underneath of the oven is ventilated.
See page 8 “Assembly for ovens with spacers”