Planar PL2210MW User Manual

9
FULL Selects wide format for display.
Expansion Mode
ASPECT Selects 4:3 format for display.
Auto Adjustment
Auto adjusts the H/V Position, Phase and Clock of
picture. (available in analog mode only)
H. Position
Adjusts the horizontal position.
(available in analog mode only)
V. Position
Adjusts the vertical position.
(available in analog mode only)
Clock
Adjusts picture Clock.
(available in analog mode only)
Phase
Adjusts picture Focus.
(available in analog mode only)
9300K Sets the color temperature to 9300K.
7500K Sets the color temperature to 7500K.
5000K Sets the color temperature to 5000K.
sRGB Sets the color temperature to sRGB.
User R/G/B Allows users to adjust red/green/blue intensity.
Language Multi-language selection.
OSD
H. Position
Adjusts the horizontal position of the OSD.
OSD
V. Position
Adjusts the vertical position of the OSD.
OSD
Turn Off
Adjusts the OSD timeout.
Volume Adjusts the volume of audio
D-SUB
Selects input signal to analog (D-Sub)
Input Select
DVI
Selects input signal to digital (DVI)
Resolution Select
720/640x400
1360/1280/1024x768
1680/1400x1050
Selects the resolution of choice.
DDC/CI ON/OFF Turns ON/OFF DDC/CI support
Recall
Clear each old status and return all adjusted
parameters to factory preset values.

Planar PL2210MW Specifications

General

Brand	Planar
Model	PL2210MW
Category	Monitor
Language	English