Planar PLL2450MW User Manual

6
First Setup
Install the Stand Base
1. Lay the LED LCD Monitor at on a table with the LED screen face down. To prevent the LED
LCD Monitor from being scratched, put a piece of soft cloth on the table on which the screen
will be set.
2. Insert Stand and Base into the monitor as shown below.
3. Stand the LED LCD Monitor up.
Disconnecting the Stand Base
1. Lay the LED LCD Monitor at on a table with the LED screen face down. To prevent the LED
LCD Monitor from being scratched, put a piece of soft cloth on the table on which the screen
will be set.
2. Push release button and pull stand away from monitor.
3. Press the tenons inward and pull the base from stand to remove.
Release button

Planar PLL2450MW Specifications

General

Pixel pitch	0.2715 x 0.2715 mm
Screen shape	Flat
Response time	12.5 ms
Backlight type	Edge LED
Display surface	Matt
Display diagonal	23.6 \
Display technology	-
Native aspect ratio	16:9
Maximum refresh rate	76 Hz
Contrast ratio (typical)	3000:1
Display number of colors	16.78 million colors
Display brightness (typical)	250 cd/m²
Supported graphics resolutions	1920 x 1080 (HD 1080)
Tilt angle range	-5 - 20 °
Cable lock slot type	Kensington
Panel mounting interface	100 x 100 mm
RMS rated power	2 W
Number of speakers	2
AC input voltage	100 - 240 V
Power consumption (standby)	0.5 W
Power consumption (typical)	18.5 W
Certification	FCC-B, CE, UL/cUL, RoHS
Product color	Black
Cables included	AC, HDMI

Weight and Dimensions

Stand weight	3850 g
Depth (with stand)	170.4 mm
Width (with stand)	547.6 mm
Height (with stand)	405.5 mm
Weight (with stand)	3120 g
Depth (without stand)	40.9 mm
Weight (without stand)	2870 g