AERMACCHI MB-339
25
PRINTING & CONSTRUCTION MANUAL
© PLANEPRINT
EN
First insert the hinges into
the rudder and stick on with
a small drop of liquid CA Glue.
Look at the instructions on
the next page!
Use here the
short connectors
1
1
1
1
2
2
2
2
First glue the connectors in
the fuselage, then glue on
the rudder and elevator.
long connector
short
connector
IMPORTANT!
For a strong connection, the adhesive surfaces
should be sanded.
Please only use fresh CA glue and activator
spray for curing!
The adhesive connections must hold perfectly!
To Next Page