PLANEPRINT Aermacchi MB-339 - Page 7

AERMACCHI MB-339
7
PRINTING & CONSTRUCTION MANUAL
© PLANEPRINT
EN
 1_
INFO
STL fi le: Covers-small-servos_p1.stl
Covers-big-servos_p1.stl
Material: PLA
Weight: ~ 6 g
ADDITIONAL SETTINGS
None required
INFO
STL fi le: Servo-frame.stl
Material: PLA
Weight: ~ 6 g
ADDITIONAL SETTINGS
None required
PLEASE NOTE
Use the fi le „small“ for smaller
servos (Hitec HS-55), „big“ for
larger ones (Turnigy TGY 50090M)