PLANEPRINT Aermacchi MB-339 - PROFILE P2_HOLLOWBODY

AERMACCHI MB-339
8
PRINTING & CONSTRUCTION MANUAL
© PLANEPRINT
EN
INFO
STL fi le: Nose1_p2.stl
Material: PLA
Weight: ~ 3 g
ADDITIONAL SETTINGS
• Infi ll Density 26 %
• Wall Line Count 4
• Bottom Layers 0
• Skirt (no Brim)
• reduce Nozzle Temp (200°C)
 2_
The following parts must be sliced with the profi le P2_HOLLOWBODY.
Recommended additional settings are listed in the screenshots.
INFO
STL fi le: Rudder-3_p2.stl
Material: PLA
Weight: ~ 5 g
ADDITIONAL SETTINGS
• Top Layers 4
• Skirt (no Brim)