Planet Audio P10AW - Specifications

- 11 -
Specications
Audio
Output power ............................................... max. 1000W
Driver size .................................................... 10”
Speaker impedance ..................................... 2.6Ω
Total harmonic distortion (THD) ................... <4%
Frequency response .................................... 20Hz - 150Hz
Signal-to-noise ratio ..................................... 68dB
Input sensitivity ............................................ 50mV (low level/RCA); 0.3V (high level)
Low pass lter (LPF) .................................... 50Hz - 150Hz
Bass boost ................................................... 0 to +12dB
Phase control ............................................... switchable between 0° and 180°
General
Power supply ............................................... 12V DC (allowable 10-16V DC)
Current consumption ................................... max. 12A
Fuse ............................................................. ATO type, 25A
PWM MOSFET power supply ...................... yes
Protection circuitry ....................................... yes (overload, short circuit, and thermal protection)
High-level inputs with auto power on ........... yes (no need to have remote wire connection)
Remote turn-on/turn-off ............................... yes
Input gain control ......................................... yes, variable
LED indicators ............................................. green - power on; red - protection
Weight ......................................................... 10.36 lbs/ 4.7 kg
Dimensions .................................................. 13.58” x 10.43” x 3.15” (345 x 265 x 80 mm)
Specications are subject to change without notice.
0522