Mounting the Controller
Note: The supplied functional controller is weatherproof. However, never submerge it.
Option 1: Surface Mount
You may use double sided adhesive tape (not included) to fasten the supplied functional controller.
Regularly check the taped controller to ensure its fastening.
Option 2: Handlebar Mount
1. Assemble and fasten the mounting clamp on your handlebar.
• Use the supplied clamp, brackets, bolts, nuts and washer and rubber strips for assembly and fastening.
• Place the supplied rubber strip on the inner side of the clamp to provide more secure fastening.
2. Secure the functional controller: snap the functional controller onto the snap bracket of the clamp via the slot
on the back of the functional controller.
Rubber strip
Handlebar clamp
Snap bracket
1
Clamp slot
2
7
To Next Page
Loading...
