PLANET ECLIPSE CS3 - Page 42

ELECTRONICS
US ER INT E RFA CE PARA METE RS
C S 3
42
FIG .4
RESTART PARAMETER
The amount of time after the last trigger pull
during which ramping can be restarted with a
single trigger pull.
> Range : 0.0 - 1.0 seconds in 0.1
increments.
FIG .3
SUSTAIN PARAMETER
The rate at which the trigger must be
continually pulled in order to maintain
ramping.
> Range : 3.3 - 10.0 pps (pulls per
second) in 0.1 increments.
FIG .2
KICK IN PARAMETER
The rate at which the trigger has to be pulled
in order to start ramping.
> Range : 3.3 - 10.0 pps (pulls per
second) in 0.1 increments.
FIG .1
SEMI SHOTS PARAMETER
The number of shots in semi automatic
required at the KICK IN rate in order to start
ramping.
> Range: 3 - 9 pulls in 1 pull increments.