12
2. When the following dialog box appears, please enter the default user name and
password“admin”.TheloginscreeninFigure4-2appears.
DefaultIPaddress:192.168.0.100
DefaultUsername:admin
DefaultPassword:admin
Figure 4-2: Web Login Screen
3. Afterenteringthepassword,themainscreenappearsasFigure4-6shows.
The following web screen is based on the firmware version of February
of 2024 or after.
4. When the following dialog box appears, please enter the default user name
“admin” and and password. Refer to Section 3.1 to determine your initial login
password.
DefaultIPAddress:192.168.0.100
DefaultUserName:admin
DefaultPassword:sw + the last 6 characters of the MAC ID in lowercase
5. Find the MAC ID on your device label. The default password is “sw” or “mc”
followedbythelastsixlowercasecharactersoftheMACID.
Model/SN:
MAC:
Managed Ethernet Device
PLANET Technology Corp.
Made in Taiwan
This device complies with Part 15 of the FCC rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
WARNING: 1) This device must be earthed. 2) For indoor use only!
SN: ZZZZZZYYMNNNNN
MAC:A8F7E0XXXXXX
MAC ID: A8F7E0XXXXXX
Default Password: swxxxxxx
("x" means the last 6 digits of the MAC address.
All characters should be in lowercase.)
Figure 4-3: Industrial Managed Switch MAC ID Label
To Next Page
Loading...
Need help?
General
