9
4. Recovering Back to Default Conguration
IP Address has been changed or admin password has been forgotten –
To reset the IP address to the default IP Address “192.168.0.100” or reset the
login password to default value, press the hardware-based reset button on the
front panel for about 10 seconds. After the device is rebooted, you can log in the
management Web interface within the same subnet of 192.168.0.xx.
GSD-1002M
10-Port Gigabit Managed Switch
PWR
100/1000X SFP
9 10
Reset
1 2 3 4 5 6 7 8
ACT
LNK 1000
ACT
LNK
1000
Reset Button
Figure 4-1: GSD-1002M Reset Button
To Next Page
Loading...
Need help?
General
