– 5 – – 6 –
Figure 3-4: Ultra PoE Managed Injector Hub Menu
Now, you can use the Web management interface to continue
the Ultra PoE Managed Injector Hub management. Please refer
to the user’s manual for more.
4.RecoveringBacktoDefaultConguration
IP Address has been changed or admin password has
been forgotten –
To reset the IP address to the default IP Address
“192.168.0.100” or reset the login password to default
value, press the reset button on the front panel for about 10
seconds. After the device is rebooted, you can login the Web
interface management within the same subnet of 192.168.0.xx.
16-Port Gigabit
60W
Ultra PoE Managed Injector Hub
UPOE-1600G
Management
Reset
SYS PWR
PoE Fail
FAN1 FAN2
1 3 5 72 4 6 8 9 11 13 1510 12 14 16
60W PoE In-use
at/af PoE In-use
PoE Power Usage (W)
600W
450W
300W
150W
Fail
PoE In-use
Ultra
60W
AT
30W
ACTLNK1000
ACTLNK10/100
1000 10/100
Figure 4-1: Ultra PoE Managed Injector Hub Reset Button
5. Customer Support
Thank you for purchasing PLANET products. You can browse
our online FAQ resource and User’s Manual on PLANET Web
site rst to check if it could solve your issue. If you need more
support information, please contact PLANET switch support
team.
PLANET online FAQ:
http://www.planet.com.tw/en/support/faq.php?type=1
Switch support team mail address:
support_switch@planet.com.tw
UPOE-800G User’s Manual:
http://www.planet.com.tw/en/support/download.
php?type1=2&model=48838&type=3
UPOE-1600G User’s Manual:
http://www.planet.com.tw/en/support/download.
php?type1=2&model=48839&type=3
Copyright © PLANET Technology Corp. 2016.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All other
trademarks belong to their respective owners.
To Previous Page
Loading...
Need help?
General