PLANET VIP-156/VIP-157 Quick Installation Guide
Voice communication samples
There are several ways to make calls to desired destination in ATA.
In this section, we’ll lead you step by step to establish your first
voice communication via keypad and web browsers operations.
ATA to ATA connection via IP address
Assume there are two ATAs in the network the IP address are
192.168.0.1, 192.168.0.2
Analog telephone sets are connected to the phone (RJ-11) port of
ATAs respectively
192.168.0.1 192.168.0.2
2*9 2 1 6 8 * 0 *
1 #
Operation steps:
1. Pick up the telephone set on ATA A.
2. Press the keypad: 192*168*0*2# shall be able to connect to the
ATA
B.
12
To Next Page
Loading...
