Quick Installation Guide
- 22 - PLANET Technology Corp.2024
5.2. Saving Configuration via the Web
In the Wall-mount Managed Switch, the running configuration file stores in
the RAM. In the current version, the running configuration sequence of
running-config can be saved from the RAM to FLASH by ”Save
Configurations to FLASH” function, so that the running configuration
sequence becomes the startup configuration file, which is called
configuration save.
To save all applied changes and set the current configuration as a startup
configuration, the startup-configuration file will be loaded automatically
across a system reboot.
1. Click ”Save > Save Configurations to FLASH” to log in
“Configuration Manager” Page.
2. Press the “Apply” button to save running configuration to start up
configuration.
To Next Page
Loading...
Need help?
General