User’s Manual of WGS-5225-8P2S Series
4.3.7.2 GVRP Port Configuration
This configuration can be performed either before or after GVRP is configured globally - the protocol operation will be the
same. as well. as screen in Figure 4-3-41 appears.
Figure 4-3-41: GVRP Port Configuration Page Screenshot
The page includes the following fields:
General Settings
The logical port that is to be configured.
Mode can be either 'Disabled' or 'GVRP enabled'. These values turn the GVRP
feature off or on respectively for the port in question.
Buttons
: Click to refresh the page. Note that unsaved changes will be lost.
: Click to undo any changes made locally and revert to previously saved values.
To Next Page
Loading...
