6
CDK14 and CDK20 EFA Kit Instructions
Attaching the EFA Kit to the CDK
The EFA Electronics box can be attached to several places on the telescope back
plate. There are eight ¼-20 threaded holes on the back of the telescope. The
EFA mounting bracket, already attached to the electronics box, can be mount-
ed to any one of the eight ¼-20 threaded holes. Use the supplied ¼-20 bolt to
attach the EFA box as shown in Picture 2. The mounting position can be varied
to accommodate other accessories such as nder scopes to assist with balance.
To Next Page