Plantronics software provides the link between your headset and the softphone application on
your computer. Plantronics software provides the ability to remotely detect and answer/end a call
from your softphone application via the headset call button.
To access the Plantronics Hub, load Plantronics software by visiting plantronics.com/software and
click on download button.
To start Hub, click Start > Programs > Plantronics > Hub
When you
first start Plantronics Hub the About Tab will be displayed. If you have at least one
Plantronics device connected to your computer using a USB connector you will see an image of
your device along with some information about that device. You will also see tabs across the top
of the application that read "About", "Updates", "Settings", and "Help" which are described below.
About Tab
Provides information about your connected device or devices; switch between devices or
set primary device (pull down menu, upper left, appears when multiple devices present).
Updates tab
Check for device firmware and Hub software updates; get information about updates
when available, install as necessary
Settings tab
Configure available settings for your device or devices, Hub software
Help tab
Support, contact, and troubleshooting information and resources
Plantronics Software
Install Plantronics Hub
Start Hub
Hub Tabs
5
To Next Page
Loading...