Plantronics EXPLORER 50 SERIES - User Manual

TAKE CONTROL
GET STARTED
EXPLORER 50 SERIES
Designed in Santa Cruz, California
GET PAIRED
Be safe! Please read the separate safety
guide for important safety information.
1 Wearing your headset, power it on. The
first time you do this it will begin the
pairing process. You hear “pairing” and
the headset indicator lights flash red
and blue.
2 Activate Bluetooth® on your phone and
set it to search for new devices.
• iPhone Settings > Bluetooth > On*
• Android
™
Settings > Bluetooth > On >
Scan for devices.
*Menus may vary by device
2 Select “PLT_E50”
If necessary, enter four zeros (0000)
for the passcode or accept the
connection. Once successfully paired
you hear “pairing successful.”
Answer or end a call
Tap the Call button .
Adjust the volume
Tap the Volume button to cycle
through preset levels.
Redial
To call the last number dialed, double tap
the Call button .
Voice dial
If your smartphone has a voice-enabled
assistant, press the Call button for 2
seconds and wait for the phone prompt.
Charge
Your headset has enough power to pair
and make a few calls. It takes 2 hours to
fully charge the headset; the indicator
light turns solid blue when charging is
complete.
Activate pair mode
Press the Call button until the indicator
light flashes red and blue and you hear
“pairing.”
Use two phones
Multipoint technology lets you pair a
second or new phone see “Activate pair
mode” in the Take Control section.
Reconnect
Bluetooth headset has a 33 feet (10
meters) effective range. If you lose
connection your headset will try to
reconnect. If your headset doesn't
reconnect, tap the Call button or
manually connect through the phone’s
Bluetooth device menu.
You can wear your headset on your right
or left ear. To adjust the fit, rotate the
earloop as shown.
FIT TIPS
NEED MORE HELP?
plantronics.com/support
©
2014 Plantronics, Inc. All Rights Reserved. Bluetooth is
a registered trademark of Bluetooth SIG, Inc. and any use
by Plantronics is under license. iPhone is a trademark of
Apple, Inc. All other trademarks are the property of their
respective owners.
Patents: US D657,781
pn85828-11 (06.14) MODEL ID EOTE14
Project: Explorer 10
Date: 04/11/2014
Component: bi-lingual, folded, getting started guide
File Name: 85829-11_E-50_EN_ES_GSG.ai
Art Master Number: 85829-11
Part Number: 85828-11
Scale: 1:1
Resolution: 300dpi
Placed Links:
Fonts: Gesta Light, Reg, Med, Bold, Bryant Reg
Software: CS6
Printing Method:
Inks and Finishes:
(if applicable, include Cyan, Magenta, Yellow, Black)
100% K
Pantone Cool Grey 8
Matte Varnish
Notes:
Original Designer: necia robertson
E-mail: necia.robertson@plantronics.com
Phone: (831) 435-9639
Revisions: [DAT E, designer’s name]
E-mail:
Phone:
Changes to art after approval:
Include date and give brief description
Dieline
Color
Photography
Text
Other
Authorized digital signatures on this document denote that all items have been verified.
Marcom lead: Obtain all final approvals prior to release of file to the printer or Plamex.
Designer: • Remove approval signatures if previously approved proof is going out with changes.
• Post final files to Fuse Team Site and inform the team, including EMEA, that files
are released.
Please note: Final approval requires the examination of a printed proof or comp, in addition to
quality control of the electronic file.
Final Approval Checklist and Signatures
BRAND AND ID [Art Director or Brand Manager; ID VP or Lead Designer] APPROVAL SIGNATURE:
• Follows brand guidelines, approved design strategy,
or creative brief
MARCOM [Marcom lead] APPROVAL SIGNATURE:
• Messaging
• Grammar
• Photography/illustrations (if any): Correct image(s) used,
usage rights verified
• Regulatory review (third-party logos, icons)
• Legal review
PLAMEX [Packaging Engineer] APPROVAL SIGNATURE:
• Dieline
• PN/AM
• Non-template designs only:
Received physical comp or match proof approval from SCZ Marcom,
Brand, ID, and Production
FINAL FILE PREP [Production Manager] APPROVAL SIGNATURE:
• File reviewed by second designer
• Pre-flight performed using Markzware or similar software
• Final zipped archive contains:
– .ai
– .eps
– from .eps: high res PDF (PDF/X-1a:2001)
– from .eps: low res PDF, 1 page for each layer
– from .ai: low res PDF with non-outlined fonts
– fonts
– links
PRODUCTION QUALITY CONTROL [Production Manager] APPROVAL SIGNATURE:
• Template (if any)
• Text: – Spellcheck
– No double spaces
– Smart quotes used. No straight quotes or apostrophes
– No improper soft or hard returns
(Type > Show Hidden Characters)
• Fonts: – Consistent style sheet application (if applicable)
– Consistent spacing, font sizes and leading
– No artificial bold or italic
• Color: – .ai file is in CMYK color mode (File > Document Color Mode)
– All colors in swatch palette not used in actual art have been deleted,
including Black and White
– Ink/finish names in art master slug match swatch names
– Check ink overprinting (Attributes)
– Inks/finishes specified and verified; PMS swatches pulled and confirmed
– No RGB inks
• Stray points and elements deleted
• Measurements from original drawing deleted
• 300 ppi photography, sized and/or rotated in Photoshop
• .125” bleed
• Non-bleeding elements maintain safe distance from dieline and folds (minimum .125”)
• Separate layers for slug, die line, inks, foil, spot finishes
N/A
Angela Kitchen
Blanca Castanda,
5/1/2013 via email
Blanca Castanda,
5/1/2013 via email
Daniel Deisla,
4/30/2013 via email

Summary

GET PAIRED

Pairing with iPhone

Steps to activate Bluetooth on iPhone and search for devices.

Pairing with Android

Steps to activate Bluetooth on Android and scan for devices.

Confirm Pairing Success

Select "PLT E50" and enter passcode if needed.

TAKE CONTROL

Manage Calls

Answer, end calls by tapping the call button. Redial last number.

Adjust Volume

Tap volume button to cycle through preset levels.

Voice Dialing

Press and hold call button to activate voice assistant.

Charge Headset

Charging time and indicator light status for full charge.

Activate Pair Mode

Manually initiate pairing mode by pressing call button.

HEADSET FIT

Adjusting Earloop

Rotate earloop to fit the headset on either the right or left ear.

USAGE TIPS

Multipoint Connection

Pair and use the headset with two phones simultaneously.

Reconnecting Device

Automatic reconnection attempts and manual connection process.

IMPORTANT SAFETY GUIDELINES

General Operational Safety

Operating temperatures and general warnings for product use.

Hearing Protection Advice

Recommendations for safe listening volumes to prevent hearing damage.

Driving and Usage Safety

Precautions for using headset while driving or cycling.

CHARGING AND BATTERY SAFETY

Charging Warnings

Use correct chargers, avoid extreme temps, and unattended charging.

Product Care

Avoiding moisture, disassembly, and handling damaged products.

BATTERY AND REGULATORY INFORMATION

Battery Warnings

Warnings on battery disposal, opening, and deformation risks.

FCC Compliance

FCC Part 15 rules, interference, and user authority to operate.

RF Exposure Information

Compliance with FCC RF exposure limits for uncontrolled environments.

Industry Canada Compliance

Industry Canada technical specs and operational conditions.

Plantronics EXPLORER 50 SERIES Specifications

General

Bluetooth Version	Bluetooth 3.0
Talk Time	Up to 11 hours
Standby Time	Up to 12 days
Multipoint Technology	Yes
Noise Reduction	Yes
DeepSleep Mode	Yes
Charging Connector	Micro USB
Voice Alerts	Yes
Water Resistance	No
Weight	10 g
Range	Up to 10 meters
Bluetooth Profiles	HFP
Battery Type	Rechargeable, non-replaceable lithium-ion polymer
Charge Time	Up to 2 hours
Compatibility	Bluetooth-enabled devices