Plantronics Explorer 500 Mite 15 - User Manual

Plantronics Explorer 500 Mite 15
Resetting the Pairing with the USB Adapter
Step 1
Press and hold the power button on the headset until the indicator
light begins to flash red and blue. This puts the headset in pairing mode.
Step 2
Press the pairing button on the USB adapter until the indicator light on the
adapter begins to flash.
Wait until the pairing light on the USB adapter turns a solid blue. This
indicates the pairing process has been successfully completed.
Resetting the Pairing with a Mobile Phone
Step 1
Enable [Bluetooth](https://itstillworks.com/13579495/what-is-bluetooth) on
your mobile phone. For most phones, this is located in the Connections menu
that should be part of the Settings. On an iPhone, this is set in Bluetooth,
which is in the General Settings screen.
Step 2
Press and hold the pairing button on the USB adapter until the pairing light
flashes red and blue.
Step 3
Initiate the search for Bluetooth devices on the mobile phone. This command
is usually found in the Bluetooth menu once Bluetooth has been enabled on
the phone. On an iPhone, the phone will automatically search for
nearby Bluetooth devices when Bluetooth has been enabled.

Summary

Resetting the Pairing with the USB Adapter

Step 1: Initiate Headset Pairing

Press and hold the headset power button until the indicator light flashes red and blue to enter pairing mode.

Step 2: Connect USB Adapter

Press the USB adapter pairing button until its light flashes, then wait for a solid blue light for successful pairing.

Resetting the Pairing with a Mobile Phone

Step 1: Enable Mobile Bluetooth

Enable Bluetooth on your mobile phone via the Settings menu, usually under Connections or Bluetooth.

Step 2: Activate USB Pairing Mode

Press and hold the USB adapter pairing button until its indicator light flashes red and blue.

Step 3: Search for Devices

Initiate a search for Bluetooth devices from your mobile phone's Bluetooth menu.

Step 4: Select Device on Phone

Choose "PROPlantronics" from the list of Bluetooth devices discovered by your phone.

Step 5: Enter Passkey

When prompted by the phone, enter "0000" as the passkey to complete pairing.

Pairing Tip

Before re-pairing, try powering the headset off and on to resolve potential temporary processing errors.

Important Warning

Exercise caution when pressing the USB adapter button to prevent damage to your computer's USB port.

Items Required for Pairing

Lists necessary equipment: Plantronics headset, computer, USB adapter, and Bluetooth-compatible phone.

Plantronics Explorer 500 Mite 15 Specifications

General

Multipoint Technology	Yes
HD Audio	Yes
Voice Alerts	Yes
Type	Mono
Noise Cancellation	Yes
Range	Up to 33 feet (10 meters)
Compatibility	Bluetooth enabled devices