Tap the Call button.
Press and hold the Call button for 2 seconds.
Tap the Volume up (+) or down (–) button.
To mute the microphone, simultaneously press and hold the Volume up (+) and Volume down (–)
buttons for 1-2 seconds. You will hear “mute on”, this voice alert will be repeated once. After that
an alert tone repeats every 15 minutes when mute is on. Press and hold buttons again to un-
mute the microphone.
Activate voice dial (phone feature)
Press the Call button
for 2 seconds, wait for the phone prompt and then tell the phone to dial
the name of a stored contact.
Press the Call button for 2 seconds, wait for the phone prompt and then tell the phone to dial
the name of a stored contact.
If your headset loses the Bluetooth
®
connection with your phone, it will automatically try to
reconnect.
If your headset can't reconnect, tap the Call button once or manually connect through the
phone's Bluetooth's device menu.
If your headset remains out of range for more than 90 minutes, the DeepSleep
®
mode will
activate.
Reselect the headset language at any time by putting your headset into pair mode.
Take Control
Answer or end a call
Decline a call
Adjust the volume
Mute on/Mute off
Activate voice dial (phone
feature)
Know how to reconnect
Change language
8
To Next Page
Loading...
Need help?
General
