6
Use your voice (English only)
When prompted by the headset, you can just say
“answer” or “ignore” to incoming calls – no need to
press any buttons.
You can disable this voice-controlled feature. With
the headset powered on, simultaneously press the
Call button and Volume button until you see the
white LED flash twice. To reactivate the feature, just
repeat the steps and you will again see the white
LED flash twice.
Use Multipoint one call at a time
With multipoint and two phones paired, it’s easy to
answer calls from either phone.
When already on a call, you will hear a ringtone
notification of the incoming call from the second
paired phone.
To answer a second call from the other phone, you
must end the current call (tap Call button) so new
call automatically answers.
If you choose not to answer the second call, it will
go to voicemail.
TIPS
To Next Page
Loading...
