Power
Make/Take/End Calls
Volume
Decipher the lights
To power on or off, press the Call
button until the indicator
light flashes blue once (on) or
red once (off).
Answer or end a call
Tap the Call button.
Redial
To dial the last number you dialled, double-tap the Call
button.
Voice dial
If your phone supports voice-activated dialling, press and hold the Call button for 2 seconds and
wait for the phone prompt and then tell the phone to dial the number of a stored contact.
Adjust the volume on your phone to control your headset volume.
Your headset has an indicator light
that flashes in response to a change in status or after a
button press.
Some examples of what you will see are:
•
Solid red until charging is complete and then solid blue
•
Flashing red and blue during pairing
•
Double red flash when battery is low
•
Double blue flash at incoming call
To Next Page
