Getting started:
Follow the steps below to get call answer/end
controls with your Savi headset and Avaya one-X®
Agent.
1. Connect your Savi base to the computer. If
this is the first time you are connecting,
wait for the installation process to
complete.
2. To get call control features, please
download the latest version of Plantronics
software at plantronics.com/software.
Note: Check with your IT staff before installing
software on your computer.
Configuring Avaya one-X Agent to always route
call audio to the headset:
3. Click the Menu icon in the upper right
corner of the main Avaya one-X Agent
screen.
4. Select Agent Preferences.
5. Then choose Audio.
6. Next select the Advanced tab.
7. Select your Plantronics headset as the
default device for both Playback and
Recording.
8. When finished select Ok.
Note: USB configuration settings are unique for each
USB port. If you connect the headset to a different port
you will need to make these changes again to set
behavior for that USB port.
Welcome:
Using a Plantronics Savi headset for PC
calls will deliver a simpler, more
comfortable and better sounding audio
experience than you could get using just
your computer’s internal microphone
and speaker.
©2011 Plantronics, Inc. All rights reserved, Plantronics, the logo design, Savi and W730 are trademarks or registered trademarks of Plantronics, Inc. Avaya one-X is a trademark of Avaya Inc. Published 05.11
Savi W730 Key Features:
Manages PC, deskphone and mobile
calls from a single headset
One-touch call answer/end, vol +/-,
mute and flash across devices
Wireless freedom up to 350 feet from
your desk
Conference in up to three additional
Savi headsets
To Next Page
Need help?
General
