Plantronics Voyager 5200 Series User Manual

Reset Sensors
You may need to reset the sensors if they are not working as expected.
• Wearing the headset, tap the Call button to test sensors. A talk time voice alert means sensors
are working. A tone or lack of voice prompts means sensors need to be reset.
• To reset the sensors, power on headset, connect the headset to a charger or directly to your
computer's USB port and place it on a flat, non-metallic surface for more than 10 seconds.
• If you don't have your charging cable available you can also reset your sensors by first turning off
the headset, then pressing and holding the Call and Mute buttons simultaneously until the
LED turns off. Then put on your headset and turn it on.
Disable sensors
• You can disable your headset smart sensors through Plantronics Hub software under the Settings
menu or in an idle state, simultaneously press and hold the call and mute buttons for 5 seconds
and a voice prompt will inform you of smart sensors status.
• Press and hold the Call
button for 2 seconds to either pause or restart playback.
Pause or restart
streaming audio
13

Plantronics Voyager 5200 Series Specifications

General

Bluetooth Version	Bluetooth 4.1
Talk Time	Up to 7 hours
Standby Time	Up to 9 days
Charging Time	90 minutes for full charge
Multipoint Technology	Yes
Earhook	Yes
Warranty	1-year limited warranty
Wireless Range	Up to 98 feet (30 meters)
Water Resistance	P2i nano-coating
Weight	20 grams
Battery Type	Rechargeable non-replaceable lithium-ion polymer
Compatibility	Bluetooth-enabled devices