To Next PageTo Next Page
Need help?Do you have a question about the Plastimo 811-S and is the answer not in the manual?
General| Category | Boating Equipment |
|---|---|
| Model | 811-S |
| Type | Compass |
| Mounting | Bracket |
| Card diameter | 81 mm |
| Material | Plastic |
| Lubber line | Yes |
| Illumination | Yes |
| Lighting | 12 V |
List of tools required for assembling the jib reefing system.
Instructions for assembling the jib reefing system with the forestay laid flat.
Step-by-step instructions for safely dismantling the forestay.
Detailed guide for assembling the jib reefing system components.
Procedure for accurately cutting the final spar section.
Instructions for correctly installing the top end stop assembly.
Process for accurately measuring forestay length for proper fit.
Instructions on how to cut the final spar section to size.
Steps for assembling the top end stop onto the spar.
Guidance on assembling the various spar sections together.
Procedure for correctly installing the base spar component.
Instructions for cutting and fitting the PVC liner.
Steps for installing the boltrope prefeeder mechanism.
Guide for assembling the main drum unit of the system.
Instructions for adjusting the angle of the reefing line feeders.
Guidance on adjusting reefing line feeders for optimal pull direction.
Instructions for winding the reefing line around the drum.
Ensuring genoa is reefed in the correct direction relative to forestay strands.
Recommended angle limits to prevent strain and damage.
Solutions for halyard twisting issues with halyard swivel.
