Plastimo 406-T User Manual

ROLLREFFANLAGE - AUFBLASBARE RETTUNGSWESTEN
ROLREEFSYSTEEM - GEBRUIKERSHANDLEIDING
RULLFOCKSYSTEM - INSTRUKTIONER OCH HANDHAVANDE
ENROLLADOR - GUIA DE UTILIZACION
406-T 609-T 811-T
JIB REEFING - OWNER'S MANUAL
AVVOLGITORE - MANUALE D'USO
ENROULEUR DE FOC - NOTICE D'UTILISATION
GB
D
NL
S
I
E
F
Plastimo - 21, rue Amiral Dordelin - 56100 Lorient - FRANCE
PANTONE 425C
Couché moderne brillant 200g
58224_03 - Page 1/68

Plastimo 406-T Specifications

General

Card Diameter	90 mm
Compensation	Yes
Waterproof	Yes
Type	Compass
Mounting	Bracket

Summary

Assembly Instructions for T-Series

Dismantling the Forestay

Steps for disassembling the lower and upper parts of the forestay.

Flat Assembly of Jib Reefing System

Assembling the jib reefing system components while the forestay is laid flat.

Positioning and Installing the Last Spar

Instructions for positioning the last spar and installing the top end stop.

In Situ Assembly: Measuring and Cutting

Measuring forestay length and cutting the last spar for on-boat installation.

In Situ Assembly: Spars and Drum Unit

Assembling top end stop, spars, and drum unit during on-boat installation.

Drum Unit Assembly and Feeder Adjustment

Assembling the drum unit and adjusting reefing line feeders for different models.

General Recommendations

Advice on reefing line, sailing, and maintenance for optimal performance.

Optional Extras: Halyard Management

Solutions for halyard angle issues using diverter wheels or feeders.