Need help?Do you have a question about the Plastimo INFLATABLE DAN BUOY and is the answer not in the manual?
General| Type | Inflatable Dan Buoy |
|---|---|
| Activation | Automatic or Manual |
| Flag | Yes |
| SOLAS Approved | No |
| Light | Yes |
| Reflective Tape | Yes |
| Material | PVC |
| Color | Yellow |
| Reflective Strips | Yes |
| Flag Included | Yes |
| CO2 Cartridge Included | Yes |
| Manual Inflation Option | Yes |
| Inflation | CO2 |
Position the bracket holder hook over the top rail and secure using rail clamps and top bolt.
Remove canister, coil lanyard, reinstall canister, and replace securing strap.
Release canister, throw forcefully overboard; lanyard remains attached to holder.
Automatic light activation upon inflation, topping up tube available on mast.
Details LED lamp, CO2 cylinder, topping up adapter, whistle, and holding straps.
Clean with fresh water, deflate, detach lanyard, replace cylinder and firing lever.
Check housing seal, screw new CO2 cylinder, and replace light if necessary.
Follow diagrams, ensure lanyard is free, close cover, and attach lanyard to holder.
Coil lanyard, reinstall canister, replace elastic, and check firing lanyard visibility.
To Next Page