Need help?Do you have a question about the Platinum 5300 TL and is the answer not in the manual?
General| Nominal AC Power | 5000 W |
|---|---|
| Nominal AC Voltage | 230 V |
| Protection degree | IP65 |
| Frequency | 50/60 Hz |
| Output Power | 5000 W |
| Waveform | Pure sine wave |
| Protection Features | Overvoltage, Undervoltage, Overload, Short Circuit, Over Temperature |
Classification and layout of danger warnings.
Explanation of instructions and list formats.
Identifies symbols used directly on the inverter.
Lists the different power range models of the inverter.
Describes available upgrades and additional system features.
Lists the components included with the inverter.
Step-by-step guide for safely removing the inverter from its packaging.
Instructions and safety precautions for physically installing the inverter.
Detailed steps to attach the mounting fixture to the wall.
Steps for securely hanging the inverter onto the mounting fixture.
Instructions for safely connecting AC and DC power to the inverter.
Details on connecting the AC power supply to the inverter.
Steps to connect the AC voltage to the inverter, including cover removal.
Procedure for connecting cables to the AC terminal block.
Instructions for connecting the DC input from solar panels.
Details on connecting the inverter to the PLATINUM network.
Steps for connecting inverters in a network using EIA485.
How to use termination plugs for network connection.
Connecting external indicator devices to the relay contact.
Connecting inverters for Phase Balancer function via RS 232.
Overview of initial inverter startup and basic settings.
Description of the initial screen displayed after startup.
Detailed steps for the first-time configuration of the inverter.
Procedure for selecting the display language for the inverter.
Process of scanning the network for connected inverters.
Assigning unique numbers to inverters in a network.
Steps to assign or confirm device numbers for networked inverters.
Setting the country-specific parameters for the inverter.
Procedure for setting the current date on the inverter.
Procedure for setting the current time on the inverter.
Detailed steps for setting date and time, including warnings.
Procedure for selecting the date display format.
Manual or automatic setting of daylight saving time.
Procedure for selecting the inverter's display language.
Explanation of the Phase Balancer and its role in load balancing.
Procedure for replacing inverters and managing device numbers.
Steps for replacing devices and updating network settings.
Instructions for renumbering inverters in a network.
How to use the DC disconnector to switch the solar generator on/off.
Overview of the inverter's display screen and control buttons.
Explanation of the status indicated by the red and green LEDs.
Shows the assigned number of the inverter.
Indicates the current day of the week.
How to navigate and interpret the standard operating display.
How to navigate and select options within the main menu.
Information on physical values and evaluation graphs shown.
Displays current DC and AC voltage, current, and power.
Explanation of feed power, energy, CO2 reduction, voltage, and current.
Options for viewing data over different time intervals.
Overview of configurable settings for the inverter.
Adjusting the volume level for audible alarms.
Configuring the behavior of the alarm relay contact.
Adjusting contrast and brightness of the inverter's LCD.
Setting currency and value for feed current rebate calculation.
Configuring system name, description, and participants.
Using the energy meter for energy and operating hour tracking.
Displays the inverter model, ENS type, and serial number.
Shows firmware, hardware, EIA485, and bootloader software versions.
How errors are displayed, including types, codes, and initial actions.
Actions and warnings for critical fatal error conditions.
Description of blocking errors, their effects, and how to stop alarms.
Handling transient errors and warnings, and restoring normal operation.
Accessing service functions like event lists and parameters.
Displays a list of detected events with codes and timestamps.
Displays and allows adjustment of operating parameters.
Selecting operating modes for the Phase Balancer function.
Setting the maximum unbalanced load for the inverter.
Configuring the response time for the Phase Balancer.
Process for reconfiguring inverter settings or country codes.
Shows the date when the inverter was first put into operation.
Displays readings from the energy meter.
How to change inverter numbers after initial startup.
Safety warnings before performing any cleaning or maintenance.
Instructions for safely cleaning the inverter, especially the fan.
Steps for safely disconnecting and removing the inverter from its mounting.
Steps for securely packing the inverter for transport or return.
Lists error codes, operating status, and recommended measures.
Specific non-blocking errors, their causes, and troubleshooting steps.
Information and diagnosis support for warning conditions.
Diagnosis support for events stored in the event memory.
Specifies which products are covered by the manufacturer's warranty.
Defines who is eligible to receive warranty services.
Conditions under which the warranty agreement is established.
Details on what is covered, excluded, and the process for repairs.
Lists conditions under which warranty claims are excluded.
Conditions for transferring the guarantee to a third party.
General terms and conditions, including void clauses and governing law.
To Next Page
