Need help?Do you have a question about the Platinum 7200 TL and is the answer not in the manual?
General| Max. DC Voltage | 1000 V |
|---|---|
| Number of MPPTs | 2 |
| AC Voltage | 230 V |
| AC Frequency | 50/60 Hz |
| Max. Output Current | 31.3 A |
| Cooling | Fan |
| Protection Degree | IP65 |
| Weight | 25 kg |
| Nominal AC Power | 7.2 kW |
| Max. AC Power | 7.2 kW |
| Operating Temperature Range | -25°C to 60°C |
| Protection Features | Overvoltage, Overcurrent, Short Circuit, Over Temperature |
Classification and layout of danger warnings.
Layout of instructions and lists.
Symbols used on the inverter itself.
Different power ranges and types of the inverter.
Available upgrades and additional features for the inverter.
Contents of the inverter package.
Steps for safely removing the inverter from its packaging.
Detailed steps and safety warnings for mounting.
How to connect the inverter electrically.
Details of the AC connection terminal.
How to connect DC power.
How to connect to the network.
Details of terminal connections.
How to establish network connections.
Connecting external indicator devices.
Information about the Phase Balancer function.
Initial display and its meaning.
Step-by-step guide for initial inverter setup.
How to select the display language.
Network scan process and participant identification.
Handling detected bus participants and network scan results.
Automatic allocation and manual adjustment of inverter numbers.
Interface for assigning device numbers to inverters.
Setting the country for specific grid conditions.
Setting the current date.
Setting the current time.
Managing unbalanced loads for grid stability.
Procedures for replacing faulty inverters.
Interface for managing replaced inverter device numbers.
Remapping inverter numbers after replacement.
How to switch the solar generator on/off.
Navigating the inverter's interface and display.
Meaning of status indicator LEDs.
Displays the inverter's identification number.
Displays the day of the week.
Description of the main inverter display.
Overview of the inverter's main menu options.
Detailed view of physical values and graphs.
Explanation of measurement units used in display.
Display of current DC and AC electrical values.
Values indicated on the inverter display.
Options for selecting data display timeframes.
How physical values are graphically represented.
Accessing and modifying inverter settings.
Options for date, time, and format settings.
Setting the current date.
Setting the current time.
Selecting the desired date display format.
Manual or automatic daylight saving adjustment.
Changing the inverter's display language.
Adjusting the volume of audible alarms.
Configuration of the alarm relay function.
Adjusting display contrast and brightness.
Displaying rebate information and kWh values.
System name and description settings.
Metering of energy and operating hours.
Accessing system and inverter status information.
Shows feed data since startup or last reset.
Displays PV system name and participant counts.
Displays the inverter model and serial number.
Shows software and hardware version details.
How errors are shown and initial troubleshooting steps.
Specific actions for critical fatal errors.
Handling blocking errors and service intervention.
How transient errors are displayed and cleared.
Accessing service functions and information.
Viewing logged events and error codes.
Setting operational parameters via service tool.
Setting operating modes for Phase Balancer.
Setting the max unbalanced load limit.
Configuring the response time for load balancing.
Reconfiguring settings after network changes.
Displaying the initial operation date.
Displaying energy meter readings.
Changing inverter numbering after startup.
Information on the inverter's maintenance requirements.
Instructions for cleaning the inverter.
Steps to safely remove the inverter from its mounting.
Procedures for returning the inverter.
Instructions for packing the inverter for transport or return.
List of error codes and corresponding measures.
Specific troubleshooting for non-blocking errors.
Detailed input specifications for inverter models.
Detailed output specifications for inverter models.
Connection types for DC, AC, and network.
Efficiency and operating temperature data.
Inverter circuit types.
Display specifications.
Datalogger capacity.
Defines which products are covered by the warranty.
Identifies who is eligible for warranty claims.
How the warranty agreement is formed.
What the warranty covers beyond vendor rights.
Warranty duration and claim process.
Exclusions and limitations of the warranty.
Specific situations where warranty claims are excluded.
Conditions for transferring the guarantee.
Clauses regarding warranty validity and voiding.
To Next Page
